Equipment Type
Pressure/ANSI Class
Size
STOPPLE® Plus fittings with the ProSeries™ Advantage are full-branch split tees for use with TDW STOPPLE and STOPPLE Plus systems.
Standardized state-of-the-art engineering and manufacturing processes provide a broader range of fittings that addresses multiple applications and operating conditions while also assuring quality and shortening lead time. Depending upon size, STOPPLE Plus fittings can be delivered in just weeks, if not days.
All STOPPLE Plus fittings are equipped with LOCK-O-RING® Plus completion plugs and have undergone extensive pressure testing and radiographic inspection. Reduced-branch fittings are available upon request.
Specifications
- 4-inch through 36-inch (with capabilites up to 60-inch).
- Pipe type: Carbon steel.
- ANSI flange class 600.
- ASME codes B31.3, B31.4, B31.8, and CSA Z662 CAT II. EN 13480 also available.
- Meets NACE MR0175.
- Temperature -45°C (-50°F) to 121°C (250°F).
- Maximum allowable operating pressure – Fully rated for each ANSI class.
- Fitting type: Size on size split tee.
Key Features
- Fittings incorporate a milled groove for the placement of back-up strips.
- No side openings in the flange reduces potential leak paths.
- Interlock system provides a positive indication that LOCK-O-RING Plus plug leaves are fully engaged.
- All fittings undergo radiographic inspection in accordance with ASME and CSA requirements.
- The completion plug contains all elastomers which can be replaced without reducing line pressure, if needed.
- Fittings are constructed with a controlled carbon equivalent to improve welding in harsh environmental conditions.
- Most fitting sleeves are manufactured from pressure vessel quality, normalized, killed carbon steel plate or other high yield strength pressure vessel quality materials.
Common Applications
- Isolation of pressurized piping systems.
- Hot tap for branch connections.
STOPPLE® Plus fittings with the ProSeries™ Advantage are full-branch split tees for use with TDW STOPPLE and STOPPLE Plus systems.
Standardized state-of-the-art engineering and manufacturing processes provide a broader range of fittings that addresses multiple applications and operating conditions while also assuring quality and shortening lead time. Depending upon size, STOPPLE Plus fittings can be delivered in just weeks, if not days.
All STOPPLE Plus fittings are equipped with LOCK-O-RING® Plus completion plugs and have undergone extensive pressure testing and radiographic inspection. Reduced-branch fittings are available upon request.
Equipment Type
Pressure/ANSI Class
Size
Specifications
- 4-inch through 36-inch (with capabilites up to 60-inch).
- Pipe type: Carbon steel.
- ANSI flange class 600.
- ASME codes B31.3, B31.4, B31.8, and CSA Z662 CAT II. EN 13480 also available.
- Meets NACE MR0175.
- Temperature -45°C (-50°F) to 121°C (250°F).
- Maximum allowable operating pressure – Fully rated for each ANSI class.
- Fitting type: Size on size split tee.
Key Features
- Fittings incorporate a milled groove for the placement of back-up strips.
- No side openings in the flange reduces potential leak paths.
- Interlock system provides a positive indication that LOCK-O-RING Plus plug leaves are fully engaged.
- All fittings undergo radiographic inspection in accordance with ASME and CSA requirements.
- The completion plug contains all elastomers which can be replaced without reducing line pressure, if needed.
- Fittings are constructed with a controlled carbon equivalent to improve welding in harsh environmental conditions.
- Most fitting sleeves are manufactured from pressure vessel quality, normalized, killed carbon steel plate or other high yield strength pressure vessel quality materials.
Common Applications
- Isolation of pressurized piping systems.
- Hot tap for branch connections.