Product part numbers may have changed. Please contact your local TDW representative to verify.
3-WAY™ Full Encirclement Tapping Tee
Equipment Type
Pressure/ANSI Class
Size
3-WAY™ Full Encirclement Tapping Tees are full-branch or reducing-branch split tees designed for use when installing branch lines.
Specifications
- 4-inch through 12-inch, other sizes available by request
- Pipe type: Steel
- ANSI flange class 600
- Compatible with Class 600 flanges (ASME B16.5 or ASME B16.47 Series A).
- Design pressure: 1480 PSI (102 bar) at 0.50 design factor and design temperature at -50°F to 250°F (-46°C to 121°C)
- Fitting type: Tapping tee
Key Features
- Full-branch or reducing-branch split tees
- Equipped with LOCK-O-RING® and LOCK-O-RING® Plus flanges to accept LOCK-O-RING and LOCK-O-RING Plus completion plugs
- Furnished with LOCK-O-RING and and LOCK-O-RING Plus flanges, permitting removal of the SANDWICH® valve after work is completed
- Welded per procedures qualified by ASME IX. All pressure containment welds are 100% volumetrically inspected
Common Applications
- Installing branch lines
- Completing hot tap branch connections on below grade piping without the need for a permanent valve below grade
3-WAY™ Full Encirclement Tapping Tees are full-branch or reducing-branch split tees designed for use when installing branch lines.
Equipment Type
Pressure/ANSI Class
Size
Specifications
- 4-inch through 12-inch, other sizes available by request
- Pipe type: Steel
- ANSI flange class 600
- Compatible with Class 600 flanges (ASME B16.5 or ASME B16.47 Series A).
- Design pressure: 1480 PSI (102 bar) at 0.50 design factor and design temperature at -50°F to 250°F (-46°C to 121°C)
- Fitting type: Tapping tee
Key Features
- Full-branch or reducing-branch split tees
- Equipped with LOCK-O-RING® and LOCK-O-RING® Plus flanges to accept LOCK-O-RING and LOCK-O-RING Plus completion plugs
- Furnished with LOCK-O-RING and and LOCK-O-RING Plus flanges, permitting removal of the SANDWICH® valve after work is completed
- Welded per procedures qualified by ASME IX. All pressure containment welds are 100% volumetrically inspected
Common Applications
- Installing branch lines
- Completing hot tap branch connections on below grade piping without the need for a permanent valve below grade
