|
Tapping Fittings are full-branch or reducing branch split tees designed for use when installing branch lines. They are equipped with ASME Class 150, 300 and 600 RF or RTJ flanges. Other ASME Class ratings are available upon request.
Flange-to-sleeve weld joints and sleeves are designed to meet pressure and reinforcement requirements of ASME codes - Class 150, 300 and 600 are standard.
Fittings are manufactured with a controlled carbon equivalent to make welding easier in harsh outside environments. All pressure-containing welds on the fittings have undergone X-ray inspection per ASME requirements.
Fitting sleeves are an extruded type design. They are manufactured from a pressure-vessel quality, normalized, killed carbon steel plate with hardness below Rc22.
The Charpy impact value of the sleeves at -50°F is available on request.
|
